Built-in W5100
Support hardwired TCP/IP (4 sockets) · 16KB socket buffers
WIZ811MJ
WIZ811MJ is the network module that includes W5100 (TCP/IP, MAC & PHY) & MAG-JACK (RJ45 with X’FMR) with other glue logics. It can be used as a component and no effort is required to interface W5100 & MAG Jack. The WIZ811MJ is an ideal option for users who want to develop their Internet enabling systems rapidly.
ioModule Form Factor
Support 2×10, 2.54mm header · compact pluggable
BUS & SPI
Support 8-bit Indirect BUS and SPI (MODE 0/3)
Ethernet MACPHY
Support 10BaseT/100BaseTX Ethernet MACPHY
Datasheet
Docs
StoreKey Features
Internet Protocols
Support TCP, UDP, WoL over UDP, IPv4, ICMP, ARP, IGMPv1/v2, PPPoE
Integrated RJ-45 (MagJack)
Support transformer & Link/Act LEDs built-in
Dedicated TX/RX Buffers
Support 16KB configurable allocation for stable throughput
3.3V -40℃ to 85℃
Support 3.3V Operation (5V tolerant I/Os)
Pin Information
J1
| Pin | Type | Name | Description |
|---|---|---|---|
| 1 | I | MOSI | SPI : Master-Out / Slave-In |
| 2 | O | MISO | SPI : Master-In / Slave-Out |
| 3 | I/O | D1 | BUS : D1 |
| 4 | I/O | D0 | BUS : D0 |
| 5 | I/O | D3 | BUS : D3 |
| 6 | I/O | D2 | BUS : D2 |
| 7 | I/O | D5 | BUS : D5 |
| 8 | I/O | D4 | BUS : D4 |
| 9 | I/O | D7 | BUS : D7 |
| 10 | I/O | D6 | BUS : D6 |
| 11 | P | GND | Ground |
| 12 | P | 3V3D | 3.3 V Power |
| 13 | I/O | A8 | BUS : A8 |
| 14 | I/O | A9 | BUS : A9 |
| 15 | I/O | A10 | BUS : A10 |
| 16 | I/O | A11 | BUS : A11 |
| 17 | I/O | A12 | BUS : A12 |
| 18 | I/O | A13 | BUS : A13 |
| 19 | I/O | A14 | BUS : A14 |
| 20 | I | NC | No connect |
J2
| Pin | Type | Name | Description |
|---|---|---|---|
| 1 | P | 3V3D | 3.3 V Power |
| 2 | I | RSTn | Hardware reset (active low, ≥ 1 µs) |
| 3 | I | SCLK | SPI : Clock input |
| 4 | I | SCSn | SPI : Chip select (active low) |
| 5 | I | WRn | Write Strobe |
| 6 | I | RDn | Read Strobe |
| 7 | I | CSn | W5100 Chip select (active low) |
| 8 | O | INTn | Interrupt output (active low) |
| 9 | P | GND | Ground |
| 10 | P | GND | Ground |
| 11 | I/O | A0 | BUS : A0 |
| 12 | I/O | A1 | BUS : A1 |
| 13 | I/O | A2 | BUS : A2 |
| 14 | I/O | A3 | BUS : A3 |
| 15 | I/O | A4 | BUS : A4 |
| 16 | I/O | A5 | BUS : A5 |
| 17 | I/O | A6 | BUS : A6 |
| 18 | I/O | A7 | BUS : A7 |
| 19 | P | GND | Ground |
| 20 | P | GND | Ground |
Features
- Plug-in network module integrating W5100 chip, transformer, and RJ45 MAG-JACK
- No external design required for transformer or PHY
- Fast evaluation for W5100 and MCU-based systems
- Supports MCU BUS and high-speed SPI interface
- Supports 4 independent hardware sockets
- Operating temperature: −40 °C ~ +85 °C
- Compact plug-in module for rapid development
Electrical Characteristics
DC Characteristics
| Symbol | Parameter | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| VDD | Supply voltage | 2.97 | 3.3 | 3.6 | V |
| VIH | High-level input | 2.0 | – | 5.5 | V |
| VIL | Low-level input | –0.3 | – | 0.8 | V |
| VOH | High-level output | 2.4 | 3.3 | – | V |
| VOL | Low-level output | 0.0 | – | 0.4 | V |
Power Dissipation
| Condition | Typ | Unit |
|---|---|---|
| 100M Link | TBD | mA |
| 10M Link | TBD | mA |
| Power Down Mode | TBD | mA |
Documentation
| Name | Description | Notes | |
|---|---|---|---|
| Datasheet | Technical specifications and interface details for WIZ811MJ | WIZ811MJ Datasheet v1.1 |
WIZ811MJ Datasheet v1.1 
|
| Comparison Table | Comparison Table with WIZ810MJ, WIZ811MJ, WIZ812MJ | Comparison Table |
Comparison Table 
|
Mechanical Information
| Symbols | Dimensions (mm) |
|---|---|
| A | 25.00 |
| B | 22.46 |
| C | 17.00 |
| D | 3.40 |
| E | 4.00 |
| F | 52.00 |
| G | 3.20 |
| H | 9.00 |
| I | 2.54 |
| J | 2.54 |
| K | 15.90 |
| L | 13.50 |
| M | 6.00 |
- Form factor: Plug-in ioModule
- Pin pitch: 2.54 mm
- Dimensions: Refer to hardware guide
Evaluation Boards & Related modules
Complementary WIZnet solutions with diverse interfaces and performance levels
Evaluation Boards
W5100
The W5100 is an embedded Ethernet controller integrating a TCP/IP stack, Ethernet MAC, and PHY in one chip, supporting protocols like TCP, UDP, and IPv4. It offers 16-byte internal memory and enables easy development with 4 hardware sockets and options for BUS and SPI connections, simplifying Internet connectivity for embedded systems
W5100S-io
W5100S-io is a compact size network module that includes a W5100S (TCP/IP hardwired chip and PHY embedded).It can be used as a component and no effort is required to interface W5100S. The W5100S-io an ideal option for users who want to develop their Internet enabling systems rapidly. W5100S-io is hardware compatible with W5500-io and W6100-io.
WIZ810MJ
WIZ810MJ is the network module that includes W5100 (TCP/IP, MAC & PHY) & MAG-JACK (RJ45 with X’FMR) with other glue logics. It can be used as a component and no effort is required to interface W5100 & MAG Jack. The WIZ810MJ is an ideal option for users who want to develop their Internet enabling systems rapidly.
WIZ811MJ
Subscribe Newsletter© 2026. WIZnet Co., Ltd. All Rights Reserved.
Search
Find WIZnet products like the W5500, W5100S, W6100, and new ioNIC series chips. Enter product names, model numbers, or keywords to explore our range of networking solutions. Start your search now!
